15
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
Pour 2 litres of water into the main wash
compartment
of the detergent drawer in
order to activate the ECO valve. Then run a
cotton cycle at 90°C, without any laundry in the
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the dispenser drawer and start
the machine.
Child safety lock
This device permits you to leave the appliance
unsupervised without having the worry that
children might be injured by or cause damage
to the appliance.
This function remains able also when the
washer-dryer is not working.
There are two different ways to set this option:
●
before pressing
the button
8
: it will be
impossible to start the machine.
●
after pressing
the button
8
it will be
impossible to change any other programme
or option.
To enable (disable) this option press
simoultaneously for about 6 seconds
2
and
3
buttons until the icon
appears (disappears)
on (from) the display.
Acoustic signals
The machine is provided of an acoustic device,
which sounds in the following cases:
●
at the end of the cycle
●
in the event of operating problems
By pressing the
4
and
5
buttons
simultaneously for about 6 seconds, the
acoustic signal is deactivated (except for the
events of operating problems).
By pressing these buttons again, the the
acoustic signal is reactivated.
Operating sequence
Washing
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
132960310.qxd 23/10/2008 12:09 Pagina 15
