Zanussi ZK 20/10 R, Инструкция

Страница: 6 / 18

24
Indicating switch
To use the yellow indicating switch placed in the
cover frame can be necessary in two cases:
1. Push the switch (it will move outwards and the
indicator lamp will give light) when the ambient
temperature goes 16 °C. The switch
operates a heater, which ensures that the
necessary -18 °C storing temperature can be
used. This is effective to an ambient
temperature limit of +10 °C.
2. To reach higher freezing capacity from
3 kg/24h, 12 kg/24h to 18 kg/24h see chapter
„Freezing“.
Handling the appliance
Putting it into use
Place the accessories into the appliance then plug to
the mains socket.
To start cooling turn the thermostatic control knob on
the right-hand side of the compartment from „0“
clockwise. In „0“ position the appliance is out of
operation.
The next paragraph will give instructions for setting.
Controlling the temperature, setting
The thermostatic controller interrupts the operation of
the appliance automatically for more or less time
depending on the setting then restarts it assuring the
required temperature.
Turning the control button towards the bigger numbers
cooling becomes more and more intensive.
In the frozen food compartment -18°C or lower
temperature can be reached if the knob of the
thermostatic control is set to 3. In this case the
temperature starting automatically in the fresh food
compartment is about +5 °C or below. The 3 position
generally meets the requirements of everyday cooling.
The temperature coming about in the refrigerator is
effected by not only the position of the thermostatic
control but the ambient temperature, frequency of
door openings and the quantity of food put into it
newly, etc.
In the maximum i.e. 5 position - in case of
increased demand e.g. during heatwaves -
without disconnecting continuous operation can
occur. This does not cause damages to the appliance.
GB