• To replace the damaged mains cable use
the following (or higher) mains cable type:
H05BB-F T min 90°C. Speak to your local
Service Centre.
Attaching the seal
1. Clean the worktop around the cut out area.
2. Attach the supplied seal stripe to the lower
edge of the hob along the outer edge of the
glass ceramic. Do not extend it. Make sure
that the ends of the seal stripe are located
in the middle of one side of the hob.
3. Add some mm when you cut the seal stripe
to the length.
4. Push the two ends of seal stripe together.
Assembly
min.
50mm
min.
500mm
min.
2mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min
30 mm
min. 500 mm
< 20 mm
> 20 mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min. 500 mm
12
www.zanussi.com
