46
CONTENTS
Warnings
45
Use
47
Cleaning the interior
47
Operation
47
Temperature regulation
47
Fresh food refrigeration
47
Freezing fresh food
48
Storage of frozen food
48
Thawing
48
Ice-cube production
48
Movable shelves
49
Positioning the door shelves
49
CrispÕn fresh
49
Hints
50
hints for refrigeration
50
Hints for freezing
50
Hints for storage of frozen food
50
Maintenance
51
Periodic cleaning
51
Periods of no operation
51
Interior light
51
Defrosting
51
Customer service and spare parts
52
Technical information
53
Installation
53
Location
53
Electrical connection
53
Changing the opening direction of the doors
54
Instructions for totally built-in
54
¥
Do not place carbonated or fizzy drinks in the
freezer as it creates pressure on the container,
which may cause it to explode, resulting in
damage to the appliance. Do not use a
mechanical device or any artificial means to
speed up the thawing process other than those
recommended by the manufacturer. Never use
metal objects for cleaning your appliance as it
may get damaged.
Installation
¥ During normal operation, the condenser and
compressor at the back of the appliance heat up
considerably. For safety reasons, minimum
ventilation must be as shown in the relevant
Figure.
Attention: keep ventilation openings clear of
obstruction.
¥ Care must be taken to ensure that the appliance
does not stand on the electrical supply cable
Important:
if the supply cord is damaged, it must
be replaced by a special cord or assembly
available from the manufacturer or its service
agent.
¥ There are working parts in this product which
heat up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
¥ Parts which heat up should not be exposed.
Wherever possible the back of the product
should be against a wall.
¥ If the appliance has been transported
horizontally, it is possible that the oil contained in
the compressor flows in the refrigerant circuit. It
is advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
Environment Protection
This appliance does not contain gasses which
could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The
appliance shall not be discarded together with
the urban refuse and rubbish. Avoid damaging
the cooling unit, especially at the rear near the
heat exchanger. Information on your local
disposal sites may be obtained from municipal
authorities. The materials used on this appliance
marked by the symbol
are recicable.