The dishes are not clean (poor wash)
■
The baskets are too full.
■
The dishes have not been arranged properly.
■
The spray arms do not rotate.
■
The spray arm holes are clogged.
■
The water inlet funnel in the centre of the upper
basket is covered by dishes.
■
The end of the drain hose is submerged in waste
water (in the sink).
■
The filters are clogged.
■
The filters are not in position.
■
Not enough detergent has been used or it is
unsuitable.
■
The detergent is old or has gone hard.
■
The salt container cap is not properly closed.
■
The washing programme selected is too gentle.
Visible lime deposits or white film on the
dishes
■
There is no salt or the softener has not been
adjusted to the hardness of the water.
■
The rinse aid has run out or too little is being used
The machine is noisy
■
The dishes are rattling against each other.
■
The spray arms are knocking against the dishes.
The dishes are not quite dry
■
The dishes have been left too long inside the
machine.
The door is difficult to close
■
The dishwasher is not level or is not properly built
lf, after the above checks, the fault persists, call your
nearest Service Centre, indicating the fault, the
appliance model (Mod.), the product number (Prod.
No.) and the serial number (Ser. No.). This informa-
tion can be found on the rating plate located on the
right-hand side of the dishwasher door (see picture).
PRA11GB
33
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
