Certain problems are due to lack of simple maintenance
or oversights and can be solved easily without having to
call out an engineer.
The machine will not start
■
The door has not been properly closed.
■
The plug is not properly inserted in the power socket.
■
There is no current at the socket. Check the fuse.
This dishwasher may display a fault code in the pilot
lights of the programmes which will assist you in iden-
tifying the fault.
If the pilot light ON//OFF is not illuminated and one of
the programme’s pilot light is flashing please carry out
the following checks.
If the pilot light of the RINSE AND HOLD
programme is flashing
The dishwasher will not fill with water
■
The water tap is closed.
Open the tap. Switch off the dishwasher; switch it
back on and start the wash programme. If the
alarm reappears, call the Service Centre.
■
Mains water supply cut off.
Wait for the supply to be restored.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
■
Water feed pipe bent or squashed.
Reposition the pipe (see instructions for connection
to the water supply).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
■
Filter in the water feed pipe clogged.
Close the water tap, unscrew the water feed pipe
and thoroughly clean the filter. Screw the pipe back
on and open the water tap.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
If the pilot light of the INTENSIVE
programme is flashing
■
The filters are clogged.
Clean the filters (see Maintenance section).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears
call the Service Centre.
if the pilot light of the QUICK programme
is flashing
The dishwasher does not empty out water
■
The discharge pipe is bent.
Eliminate the bend ( see instructions for connection
to the drain).
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
■
The sink drain is blocked.
Unblock the sink drain pipe.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
■
The discharge pipe extension is not correct.
Carefully follow the instructions for “Connection to
the drain”.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
■
The wall drain connection has no breather.
Consult a qualified engineer.
If the pilot light of the NORMAL
o
ECONOMY
programme is flashing
■
General.
Switch off the dishwasher; switch it back on and
start the wash programme. If the alarm reappears,
call the Service Centre.
SERVICING
PRA10GB
32
