Zanussi ZHC 914, Руководство по установке, использованию и техническому обслуживанию

Страница: 8 / 15

18
Part 1 - INSTALLATION INSTRUCTIONS
4.3 - Installation of the chimney A
No matter which type of installation is being used, any wooden shelves in the area
where the hood is to be fitted must first be removed, drilled and later replaced.
1 - Drilling the shelves:
a) Using the cardboard template provided,
and taking hole “ B ” as a point of
reference, drill the shelves along the
central axis to allow the passage of the
chimney. The chimney must be
inserted into the shelves before it is
fixed to the hood canopy
C ( fig. 12 ).
b) When installing the ducting version with
the air outlet directed upwards, if the
ducting fan unit is positioned below the
line of shelves it will be necessary to
drill a suitable hole in the top shelf only,
to allow the air ducting pipe to pass
through (
fig. 13 ).
2 - Direction and position of the ducting
fan unit
a) The hood is normally supplied with the
air outlet directed towards the wall ( fig.
3 ), if it is to be installed with the air outlet
directed to the right or left ( fig. 4a-b ), it
will be necessary to change the direction of the ducting fan
unit, proceeding as follows:
- Unscrew the screws U ( fig.
14 );
- Turn the ducting fan unit 60
°
to the right or left;
- Replace the screws U .
b) The ducting fan unit air
outlets must be arranged according to the type of installation
to be carried out.
· Air outlet directed upwards ( fig. 2a-b ).
- Remove the plastic plug from the upper part of the venting grill and replace it on the
rear part ( fig. 15 ).
· Air outlet directed towards the wall ( fig. 3 ).
- Remove the plastic frame from the air outlet ( fig. 16 ).
S07_08
S07_09
1 2
1 2
1 3
1 3
1 4
1 4
1 5
1 5
1 6
1 6