14
GB
• Drill ø 8 mm holes at all the centre points marked.
• Insert the wall plugs
11
in the holes.
• Fix the brackets using the
12a
screws (4,2 x 44,4) supplied.
• Fix the back panel (where present) using the
12a
(4,2 x 44,4) screws supplied.
Mounting the hood body
• Screw the two screws
12d
supplied onto the
brackets
7.1
.
• Hook the hood body onto the bracket
7.1,
centring it around the vertical line.
• Use the adjusting screws
12d
underneath the
hood to level the hood body.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 150 or 125 mm, the choice of which is left to the installer.
• To install a ø 125 mm air exhaust connection,
insert the reducer flange
9
on the hood body
outlet.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
7.1
12.d
ø 125
ø 150
9
