Zanussi ZGO65414, Руководство пользователя

Страница: 8 / 16

colorations. Use a special cleaner appli-
cable for surface of hob.
2. Clean the appliance with a damp cloth and
some detergent.
3. At the end rub the appliance dry with a
clean cloth.
In order to properly place the pan supports,
make sure that the arms of the pan support are
positioned in correspondence with the hole
placed at the base of the burner. This way, the
pan support will be stable and fixed.
Warning! Do not use knives, scrapers or
similar instruments to clean the surface of
the glass or between the rims of the burners
and the frame (if applicable).
Warning! Do not slide cookware over the
glass because it could scratch the surface.
Also, do not let hard or sharp objects fall onto
the glass or hit the edge of the hob.
Cleaning of the spark plug
This feature is obtained through a ceramic igni-
tion candle with a metal electrode. Keep these
components well clean to prevent difficult light-
ing and check that the burner crown holes are
not obstructed.
Periodic maintenance
Periodically speak your local Service Force
Centre to check the conditions of the gas sup-
ply pipe and the pressure adjuster, if fitted.
Troubleshooting
Problem Possible cause Remedy
There is no spark when lighting
the gas • There is no electrical supply • Make sure that the unit is con-
nected and the electrical supply
is switched on.
• Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
• Burner cap and crown are
placed uneven
• Make sure that the burner cap
and crown are in correct posi-
tions.
The flame is blow out immediately
after ignition • Thermocouple is not heated
sufficient
• After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
The gas ring burns unevenly • Burner crown is blocked with
food residues
• Make sure that the injector is
not blocked and the burner
crown is clear of food particles.
8
www.zanussi.com