Zanussi ZGF 646 CT, Руководство пользователя

Страница: 19 / 44

19
Fitting the hob to the worktop
The hob can be installed in a kitchen
unit with an opening for insertion whose
dimensions are shown in Fig. 8. To
install the hob, proceed as follows:
1. Remove the pan supports, the
burners caps and crowns and turn
the hob upside down, taking care
the ignition candles are not
damaged in this operation.
2. Put the relevant sealings, supplied
with the hob, on the side edges of the
cut out and at 8 mm from the front and
rear edges, as shown in Fig. 9, taking
care that the sealings meet without
overlapping.
3. Place the hob in the cut out, taking
care of its centring.
4. Fix the hob with the relevant screws
(Fig. 10). The traction of the screws is
able to trace the sealing, any excess
of which can then be easily removed.
The edge of the hob forms a double
labyrinth seal which provides a total
guarantee against infiltration of liquids.
Fig. 10
Fig. 9
sealing
gasket
Dimensions are given in millimeters
Fig. 8