Zanussi ZFU27500WA, Руководство пользователя, Страница: 15 / 44

About 12 hours prior to defrosting, set
a lower temperature, in order to build
up sufficient chill reserve for the
interruption in operation.
A certain amount of frost will always form on the
freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a
thickness of about 3-5 mm.
1. Switch off the appliance, or pull out electrical
plug from the wall socket.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool place.
WARNING! Do not touch frozen
food with wet hands. Hands can
freeze to the food.
3. Leave the door open and insert the plastic
scraper in the appropriate seating at the
bottom centre, placing a flat vessel underneath
to collect the defrosting water.
In order to speed up the defrosting process,
place a pot of warm water in the freezer
compartment. In addition, remove pieces of ice
that break away before defrosting is complete.
4. When defrosting is complete, dry the interior
thoroughly and keep the scraper for future use.
5. Switch on the appliance.
Wait at least 3 hours before putting the food back
into the freezer compartment.
PERIODS OF NON-OPERATION
When the appliance is not in use for long periods,
take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Defrost (if necessary) and clean the appliance
and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem Possible cause Solution
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Operation"/"Control
Panel" chapter.
Many food products were put
in at the same time.
Wait a few hours and then check
the temperature again.
15