Zanussi ZFU20223WA, Руководство пользователя

Страница: 7 / 28

TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem Possible cause Solution
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
Audible or visual alarm is on. The cabinet has been recently
switched on or the tempera-
ture is still too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The temperature in the appli-
ance is too high.
Refer to "Door Open Alarm"or
"High Temperature Alarm".
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Operation"/"Control
panel" chapter.
Many food products were put
in at the same time.
Wait a few hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
The QuickFreeze function is
switched on.
Refer to "QuickFreeze function".
The compressor does not
start immediately after press-
ing the QuickFreeze or after
changing the temperature.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water outlet to
the evaporative tray.
Temperature cannot be set. The QuickFreeze or Quick-
Chill function is switched on.
Switch off QuickFreeze or
QuickChill manually, or wait until
the function resets automatically
to set the temperature. Refer to
"QuickFreeze or QuickChill func-
tion".
The temperature in the appli-
ance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower temperature.
The food products tempera-
ture is too high.
Let the food products tempera-
ture decrease to room tempera-
ture before storage.
7