Zanussi ZFC21410WE, Руководство пользователя

Страница: 8 / 12

Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Switch off the appliance and disconnect the
appliance from electricity supply.
2. Remove all food
3. Defrost and clean the appliance and all
accessories.
4. Leave the lid open to prevent unpleasant
smells.
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem Possible cause Solution
The appliance does not operate. The appliance is switched off. Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the mains
socket.
Connect to a different electrical
mains socket. Contact a qualified
electrician.
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands
stable.
Audible or visual alarm is on. The cabinet has been recently
switched on or the temperature
in the appliance is too high.
Refer to "High Temperature
Alarm" and if the problem still oc-
curs contact the nearest Author-
ized Service Centre.
Power indicator light is flashing. An error has occurred in measur-
ing the temperature or the appli-
ance is not working properly.
Contact the nearest Authorized
Service Centre.
The lid doesn't close completely. Food packages are blocking the
lid.
Arrange the packages in the right
way, see the sticker in the appli-
ance.
There is excessive frost. Eliminate excess frost.
The lid is difficult to open. The lid gaskets are dirty or sticky. Clean the lid gaskets.
The valve is blocked. Check the valve.
The compressor operates contin-
ually.
Temperature is set incorrectly. Refer to "Operation" chapter.
Large quantities of food to be
frozen were put in at the same
time.
Wait some hours and then check
the temperature again.
8 www.zanussi.com