19
MAINTENANCE
Before carrying out any operation, unplug the appliance
Periodic cleaning
Wash the interior with lukewarm water and sodium
bicarbonate, and clean the painted components with
silicone wax; clean the condenser and the motor
compressor with a brush or a vacuum cleaner. This
operation will improve the operation of the
appliance and save energy.
Idle periods
During periods when the appliance is not used, you
should take the following precautions:
remove the plug from the wall socket;
remove all food from the appliance;
defrost and clean the interior and all accessories;
leave the door slightly open, thus letting air
circulate and preventing the formation of mould and
unpleasant smells.
Interior light bulb
The light bulb in the refrigerator compartment is
easy to get at through the opening in the light
holder.
If the light does not come on when the door is
opened, make sure it is properly fitted; if the
malfunction continues, replace the light bulb using a
new light bulb with the same rating.
Fig. 12
D055
SERVICING
If the appliance is not functioning properly check
that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is no power failure; the control knob is in the
right position.
Furthermore:
if the appliance seems too noisy check that the sides
are not touching furniture that can transmit or
amplify noise or vibration. Also, check that the
refrigerant unit does not vibrate.
If there is water on the fridge bottom, make sure
the defrost water drainage hole is not clogged
(Fig. 10).
If your appliance is still not working properly after
making the above checks, contact your local dealer
or the nearest service center.
To obtain fast service, it is essential that when you apply for it
you specify the model and serial number of your appliance
which can be found on the warranty certificate or on the
rating plate, on the bottom left side of the refrigerator
compartment.
