Zanussi ZEE3921IXA, Руководство пользователя

Страница: 13 / 32

Helpful hints and tips
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a solid hotplate before you start
it.
• Stop the solid hotplate before the end of the
cooking time to use residual heat.
• For satisfactory results, the diameter of pans and
cooking zones must have the same dimensions.
Cookware
• The bottom of the cookware must be as thick and
flat as possible.
Use pots and pans with bottom applicable to the di-
mension of burner.
Cooking area Diameters of cookware
Front max. 145 mm
Rear max. 180 mm
Examples of cooking applications
Heat
setting:
Use to:
1 Keeping warm
2 Gentle simmering
3 Simmering
4 Frying / browning
5 Bringing to the boil
6 Bringing to the boil / quick frying / deep-
frying
Information on acrylamides
Important! According to the newest scientific knowledge, if
you brown food (specially the one which contains starch),
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Before any maintenance or cleaning can
be carried out, you must disconnect the hob from
the electricity supply.
The hob is best cleaned while it is still warm, as
spillage can be removed more easily than if it is left
to cool.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains have no effect on how the
appliance operates.
Removing the dirt:
1. Use the fine scouring powder or a scouring pad to
remove the dirt.
2. Clean the appliance with a damp cloth and some de-
tergent.
3. Heat the hotplate to a low temperature and leave to
dry.
4. To maintain the hotplates, wipe the plates with a
drop of olive oil on a kitchen towel to prevent rust.
Important! For stainless steel edges of the hob use cleaner
for stainless steel.
The stainless steel edge of the plate can be slightly
discoloured as a result of the thermal load.
13
www.zanussi.com