Zanussi ZDT425, Инструкция

Страница: 7 / 22

The digital display indicates:
- the level of hardness to which the water softener is set,
- if the audible signals are activated/deactivated,
- the number corresponding to the selected washing
programme,
- the approximate remaining time of the running programme,
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
«Half load» button:
this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this option, the prewash phase is
automatically excluded with programme 2 (Intensive 70°C).
(In
this case the detergent dose for the prewash phase is no
longer necessary).
The duration of the washing phase with programme 5 (Bio
50°C with prewash) will be reduced.
With programmes 1 (Rinse and Hold), 3 (Quick Wash 30 I ), 4
(Auto) and 6 (Delicate 45°C no prewash) it is not possible to
select the half load option (Button deactivated - indicator light
off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
Indicator lights:
have the following meanings:
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate and 2 horizontal
lines (--) are visible in the digital display (setting mode).
If in the digital display is visible the number of a programme
(1 - 2 - 3 etc..), this means that a washing programme is set.
The programme must be cancelled: press simultaneously
the function buttons 2 and 3 for about 2 seconds. The
indicator lights of the programme selection buttons will
illuminate and 2 horizontal lines will appear in the digital
display, this means that the set washing programme has
been cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
setting.
4. To change the current setting, press again function button 3,
the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
25
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse aid refilling indicator light, illuminates when
rinse aid has run out.
End of programme: illuminates when the washing
programme has ended.
Audible signals deactivated
Audible signals activated (factory set)