Zanussi ZDS15010WA, Руководства пользователя

Страница: 7 / 20

USER MODE
Press and hold simultaneously Delay and Start until the indicators , and start to
flash.
In user mode, the following settings can be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
• The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid.
These settings are saved until you change them again.
ADJUSTING THE WATER SOFTENER
While the appliance is in user mode:
1. Press Program.
• The indicators and go off.
• The indicator continues to flash.
• The display shows the current setting: e.g.
= level 5.
2. Press Program to change the setting. Each
time you press the button, the level number
increases. After level 10 you start again from
level 1.
3. Press the on/off button to confirm the setting.
THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke degrees
Water softener
level
47 -50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting
2) Do not use salt at this level.
7