Zanussi ZDS15010WA, Руководства пользователя

Страница: 10 / 20

ADDING DETERGENT
2
1
20
30
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
2
1
20
30
THE AUTO OFF FUNCTION
This function decreases energy consumption by deactivating automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
STARTING A PROGRAMME
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
2. Close the appliance door.
3. Press Program again and again until the
indicator of the programme you want to select
comes on.
The display shows the programme duration.
4. Set the applicable options.
5. Press Start to start the programme.
• The washing phase indicator comes on .
• The programme duration starts to decrease
with steps of 1 minute.
STARTING A PROGRAMME WITH DELAY
START
1. Set a programme.
2. Press Delay again and again until the display
shows the delay time you want to set (from 1 to
24 hours).
The indicator of the selected programme flashes.
3. Press Start.
4. Close the appliance door to start the
countdown.
• The indicator of the selected programme is
on with fixed light.
• The countdown starts to decrease.
– From 24 to 11 hours, the countdown
decreases with steps of 1 hour.
– From 10 to 1 hour, the countdown
decreases with steps of 1 minute.
When the countdown is completed, the programme
starts.
OPENING THE DOOR WHILE THE APPLIANCE OPERATES
If you open the door while a programme is running, the appliance stops. When you close the door, the
appliance continues from the point of interruption.
10