• Make sure that the spray arms can move
freely before you start a programme.
Before starting a programme
Make sure that:
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets is
correct.
• The programme is applicable for the type of
load and for the degree of soil.
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid (un-
less you use combi detergent tablets).
• The cap of the salt container is tight.
Care and cleaning
Warning!
Before maintenance, deactivate
the appliance and disconnect the mains
plug from the mains socket.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if necessary, clean
them.
Cleaning the filters
1
C
B
A
2
3
To remove filters (
B
)
and (
C
), turn the han-
dle counterclockwise
and remove. Pull
apart filter (
B
) and
(
C
). Wash the filters
with water.
A
4
Remove filter (
A
).
Wash the filter with
water.
D
A
5
Put filter (
A
) to its ini-
tial position. Make
sure that it assembles
correctly under the
two guides (
D
).
6
Assemble filters (
B
)
and (
C
). Put them in-
to position in filter
(
A
). Turn the handle
clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and damage to
the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, re-
move remaining parts of soil with a thin pointed
object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abra-
sive products, abrasive cleaning pads or sol-
vents.
26
www.zanussi.com
Содержание ZDI16003XA
Страница 57: ...57 www zanussi com ...
Страница 58: ...58 www zanussi com ...
Страница 59: ...59 www zanussi com ...
Страница 60: ...www zanussi com shop 156963540 A 292012 ...
