Manual adjustment
1
2
Turn the water hard-
ness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the appli-
ance. The on/off indicator comes on. Make
sure that the appliance is in setting mode.
Refer to ‘SETTING AND STARTING A
PROGRAMME’.
2. Press and hold function buttons (
B
) and (
C
)
at the same time until the indicators above
function buttons (
A
), (
B
) and (
C
) flash.
3. Press function button (
A
).
• The indicators above function buttons (
B
)
and (
C
) go off.
• The indicator above function button (
A
)
continues to flash.
• The display shows the setting of the wa-
ter softener. Example:
= level 5.
4. Press function button (
A
) again and again
to change the setting.
5. Deactivate the appliance to confirm.
Filling the salt container
Caution!
Water and salt can come out
from the salt container when you fill it. Risk
of corrosion. To prevent it, after you fill the salt
container, start a programme.
1
2
3
Put 1 litre of water in
the salt container (on-
ly for the first time).
4
5
6
Filling the rinse aid dispenser
1
2
22
www.zanussi.com
Содержание ZDI16003XA
Страница 57: ...57 www zanussi com ...
Страница 58: ...58 www zanussi com ...
Страница 59: ...59 www zanussi com ...
Страница 60: ...www zanussi com shop 156963540 A 292012 ...
