Zanussi ZDF17002XA, Руководство пользователя

Страница: 9 / 20

XTRADRY
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all programmes
other than
. It is automatically activated in
next cycles. This configuration can be changed at
any time.
Every time is activated,
XtraDry is off and needs to be chosen
manually.
Activating XtraDry deactivates TimeManager and
vice versa.
How to activate XtraDry
Press
.
The related indicator is on.
The display shows the updated program duration.
TIMEMANAGER
The TimeManager allows to reduce the duration of
a selected programme by approximately 50%.
The washing results are the same as with the
normal programme duration. The drying results can
decrease.
This option increases the pressure and the
temperature of the water. The washing and the
drying phases are shorter.
By default, TimeManager is off, but it is possible to
activate it manually. This option cannot be
combined with XtraDry.
How to activate TimeManager
Press Option until the indicator
is on.
The display shows the updated programme
duration.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
After starting a programme, it may take up to 5
minutes for the appliance to recharge the resin in
the water softener. It seems that the appliance is
not working. The washing phase starts only after
this procedure is completed. The procedure is
repeated periodically.
THE SALT CONTAINER
CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
The salt is used to recharge the resin in the water
softener and to assure good washing results in
daily use.
ADDING SALT
Before the first use, put one litre of water in the salt container.
CAUTION! Water and salt can come out of the salt container during filling. To prevent
corrosion, start a programme immediately after filling the salt container.
9