Zanussi ZDF17002XA, Руководство пользователя

Страница: 11 / 20

• Adjust the water softener to the lowest level.
• Set the rinse aid dispenser to the lowest position.
STARTING A PROGRAMME
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press Program again and again until the
indicator of the programme you want to select
comes on.
• If you want to select the MyFavourite
programme, press and hold Program until
the MyFavourite setting comes on.
The display shows the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
• The running programme indicator comes
on .
• The programme duration starts to decrease
with steps of 1 minute.
STARTING A PROGRAMME WITH DELAY
START
1. Set a programme.
2. Press Delay repeatedly until the display shows
the desired delay time (from 1 to 24 hours).
The indicator of the selected programme flashes.
3. Close the appliance door to start the
countdown
• The indicator of the selected programme is
on with fixed light.
• The remaining time counts down in hours.
The final hour is displayed in minutes.
When the countdown is completed, the programme
starts.
OPENING THE DOOR WHILE THE
APPLIANCE OPERATES
Opening the door while a programme is running
stops the appliance. It may affect the energy
consumption and the programme duration. After
closing the door, the appliance continues from the
point of interruption.
If the door is opened during the drying
phase, before AirDry automatically
opens it, the programme ends after 30
seconds.
If the door is closed after it is opened
automatically by AirDry in the drying
phase, the programme ends after 3
minutes.
Do not try to close the appliance door
within 2 minutes after AirDry
automatically opens it, as this may
cause damage to the appliance.
END OF THE PROGRAMME
When the programme is completed the display
shows 0:00 and the running programme indicator is
off.
All buttons are inactive except for the on/off button.
1. Press the on/off button or wait for the Auto
OFF function to automatically deactivate the
appliance.
If you open the door before the activation of
Auto OFF, the appliance is automatically
deactivated.
2. Close the water tap.
THE AUTO OFF FUNCTION
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
HINTS AND TIPS
GENERAL
The following hints will ensure optimal cleaning and
drying results in daily use and also help to protect
the environment.
• Remove larger residues of food from the dishes
into the waste bin.
• Do not pre-rinse dishes by hand. When needed,
use the prewash programme (if available) or
select a programme with a prewash phase.
• Always use the whole space of the baskets.
• When loading the appliance, make sure that the
dishes can be completely reached and washed
by the water released from the spray arm
nozzles. Make sure that items do not touch or
cover each other.
• You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
11