Zanussi ZDCB47209W, Руководство пользователя

Страница: 11 / 20

Door opening and
laundry loading
1. Open the door.
2. Load your laun-
dry (do not force
it in).
Caution! Do
not jam laundry
in between the load-
ing door and rubber
seal.
3. Close loading
door securely.
Lock must audi-
bly lock.
Selecting the pro-
gramme
Turn the programme
selector dial to the
required programme.
The light START/
PAUSE starts to
flash.
1 2 3
4
Selecting additional functions
You can choose from the additional func-
tions:
button 1 - DELICATE
button 2 - ANT-ICREASE
button 3 - BUZZER
button 4 - DELAY
DELICATE
gentle drying with reduced heat of sensitive fabrics
and temperature-sensitive textiles (e.g. acrylic, vis-
cose) marked on care label with:
ANTI-CREASE
prolongs the anti-crease phase to 90 mins in total.
The laundry remains relaxed and free of creases.
BUZZER
audible confirmation of:
• cycle end
• anti-crease phase start and end
• cycle interruption
• error
DELAY START
allows to delay the start of a drying programme: 3
or 6 or 9 hours
1. select the drying programme and additional
drying options
2. press the Delay button repeatedly until the de-
sired delay start is chosen
3. to activate the delay timer, press the Start/
Pause button
Starting the programme
Press Start/Pause button to start the dryer
after having selected the programme and the
options. The relevant light will stop flashing. If
the programme selector dial is turned to anoth-
er position, when the machine is running, the
buzzer will sound and the programme phase
indicator lights will flash. The drum turns alter-
nately in both directions during drying.
All drying programmes end with a 10 minute
cooling phase. You may remove the laundry af-
ter this phase.
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again af-
ter closing the door in order to restart the pro-
gramme from the point at which it was inter-
rupted. This button must be depressed also af-
ter a power failure and after having reinserted
the water reservoir, if it has been emptied in
the middle of a programme after lighting up of
light
Tank .
In both cases the light of the Start/Pause
button flashes to remind you that the start but-
ton needs to be pressed again.
Indicator lights
These lights indicate the following functions:
•
Drying light: This light indicates that the
appliance is in the drying phase.
•
End/Anti-crease light: This light is on
at the end of the cooling phase, during the
11
www.zanussi.com