Zanussi ZDCB47209W, Руководство пользователя

Страница: 12 / 20

anticreasing phase and at the end of the
programme.
•
Tank light: This light indicates that the
appliance is in the drying phase. This light
comes on at the end of the programme to
remind you that the water reservoir must be
emptied out. If this light illuminates during a
programme this means that the water reser-
voir is full. The buzzer sounds, the pro-
gramme stops, the light of the Start/Pause
(Start/Pause) button flashes. This light
comes on also when the water reservoir is
not inserted correctly.
•
Filter light: This light illuminates at the
end of the programme to remind you that the
filters must be cleaned.
•
Condenser light: It comes on every 80
cycles to remind you that the condenser
must be cleaned.
Changing programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
OFF position. The programme is cancelled.
The programme can no longer be
changed directly once the programme has
started. If nevertheless there is an attempt to
change the programme on the programme
knob or if an function button (excluding the
BUZZER button
1)
) is pressed, led on the
START/PAUSE button starts flashing tempora-
rily in red. The drying programme is not howev-
er affected by this (laundry protection).
At the end of the programme
If the laundry is not removed at the end of the
cycle, the dryer performs an anticreasing phase
(duration: 30 minutes maximum).
If you do not remove the laundry, the dryer will
stop automatically at the end of the anticreas-
ing phase. Lights
End/Anti-crease ,
Filter and Tank remain lit and the buzzer
sounds for 2 minutes.
Turn the programme selector dial to
to
switch the machine off. Remove the laundry
from the drum and carefully check that the
drum is empty.
If you do not intend to carry out another wash,
close the water tap. Leave the door open to
prevent the formation of mildew and unpleas-
ant smells.
If you open and then close the door be-
fore turning the selector dial to
all the
lights corresponding to the phases making up
the performed programme come on.
After each use
• Clean the filters.
• Empty the water reservoir.
Cleaning and maintenance
Cleaning fluff filters
The filters collect all the fluff which accumu-
lates during drying. To ensure that the dryer
works perfectly, the fluff filters (fine filters and
fluff filters) must be cleaned after each drying
cycle.
Caution! Never operate the dryer without
fluff filters or with damaged or blocked
fluff filters.
1) Only dryers with buzzer button
12
www.zanussi.com