Zanussi ZCM561MW1, Руководство по эксплуатации и установке

Страница: 17 / 24

17
Installation
Positioning
The cooker has been registered as a “Class Y”
appliance according to Fire Rick Regulations. Any
adjacent cabinets or walls must not exceed the
cooker’s height.
The cooker may be located in a kitchen, a
kitchen/diner or bed sitting room, but not in a
bathroom or shower room.
The minimum distance combustible material can be
fitted above the cooker in line with the edges of the
cooker is 69 cm (see fig.)
The cooker should be placed only on the
floor, but not on the base.
61 cm
69c
m
Gas connection
Your cooker is delivered adjusted for the kind of gas
stated on the rating plate.
It might be necessary to pass to another kind of gas,
different to the one it is preset to. Under these
circumstances follow the instructions bellow.
For best efficiency, lowest consumption
and a longer length of life of your cooker, the
manifold gas pressure has to respect the values
shown in table no.1
If the appliance is supplied with Butane or Propane
gas check that from the pressure regulator, the
pressure for Butane is 28-30 mbar and for Propane
28-30 (or 37) mbar.
Connection using a rigid pipe or a flexible pipe
(class 1).
1. For network gas:
Flexible, nonmetal pipe
•
Use a flexible rubber pipe non longer than 1,5 m
and inner diameter of 15 mm mounted with its
holder
Make sure it is well inserted and fix it by means of
a collar (see figure)
Fitting
Necklace
Connection
gas
Pipe
flexible
Flexible pipe
•
Flexible pipe (mechanic connection) max length
1.5 m;
•
We advice to use a flexible pipe, according to
the national rule in force, not shorter than 1 m,
depending on the position of the tap (see
figure);
•
Connect one end of the pipe to the blocking tap,
than, before placing the appliance between the
furniture, connect the other end to the pipe
extension, inserting a gasket.
•
Place the cooker checking that the loop made
by the flexible pipe develops in the sanitary
empty of the furniture.