Zanussi ZCI68300BA, Руководство пользователя

Страница: 10 / 28

the second cooking zone. The display for the
reduced zone changes between two levels.
Power management for the right cooking
zones and the top oven
The right cooking zones and the top oven
use the same energy source (the same
electrical phase) when they operate at the
same time. The power management prevents a
circuit overload.
The more power the top oven uses during its
operation, the less is available for the right
cooking zones. When a zone cannot use the
full power, the display for the zone changes
between the two levels.
Timer
Use it to set an automatic switch-off time for a
cooking zone.
1.
Set the cooking zone. Touch again and
again until the indicator for the necessary
cooking zone comes on.
You must set the cooking zone before
you activate the timer.
2. Set the heat setting for the cooking zone.
You can also set it after you activate the
timer.
3. To activate the timer or change the set
time, touch
+ or - on the hob control pan-
el. The maximum time you can set is 99
minutes.
The indicator of the cooking zone flashes
slowly. The timer starts to count down.
4.
To see the remaining time, touch again
and again until the indicator for the neces-
sary cooking zone flashes quickly. The
display shows the remaining time.
When the set time ends, 00 flashes and
an acoustic signal sounds. The cooking
zone deactivates.
5.
Touch to stop the signal.
To deactivate the timer before the set
time is completed, set the cooking zone
with and touch - . The remaining time
counts down to 00 . The indicator of the cook-
ing zone goes out.
You can use the timer as a Minute Minder
when the cooking zones do not operate. To do
this, set the cooking zone and activate the tim-
er but do not set the heat setting.
STOP+GO
The function sets all cooking zones that
operate to a Keep Warm setting ( ).
When operates, you cannot change the
heat setting.
does not stop the timer function.
•
To activate this function touch .
comes on.
•
To deactivate this function touch . The
heat setting that you set before comes on.
Lock
When the cooking zones operate, you can
lock the control panel. It prevents an acciden-
tal change of the heat setting.
This function does not deactivate the timer
function.
1. Set the heat setting.
2.
To activate this function, touch . The
display shows the symbol for 4 sec-
onds.
3.
To deactivate this function, touch . The
display shows the heat setting that you
set before.
When you deactivate the appliance, the
function is deactivated.
Child safety lock
This function prevents an accidental operation
of the hob.
10
www.zanussi.com