Zanussi ZCA 93 B/W, Инструкция по эксплуатации и сборке

Страница: 4 / 12

4
SPECIFICATIONS
Dimensions: ZCA 93 B/W
Length 572 mm
Width 502 mm
Height 49 mm
Cut Out dimensions
Length 560 mm
Width 490 mm
Voltage 240 V ~ 50 Hz
Total Power 5.8 kW
1) Cooking Zone
∅
180 mm 1700 W
2) Cooking Zone
∅
145 mm 1200 W
3) Cooking Zone
∅
180 mm 1700 W
4) Cooking Zone ∅ 145 mm 1200 W
5) Residual Heat Indicator
Rating plates:
Typ 082.0 ZCA 93 W Prod.No. 941 591 660
Instr. No. Ser.No. 5.8 kW
Z A N U S S I 240 V ~ 50 Hz
SWISS MADE
Typ 082.0 ZCA 93 B Prod.No. 941 591 659
Instr. No. Ser.No. 5.8 kW
Z A N U S S I 240 V ~ 50 Hz
SWISS MADE
2 3
1 5 4
INSTALLATION
Fig.1 Unpacking
Please examine the appliance for any damage sustained
during transportation!
If the appliance is damaged please inform the installer
or retailer immediately, before the appliance is connec-
ted. The packing material should be disposed of
properly.
Before using your hob
Clean your ceramic hob thouroughly before its first use.
Ceramic hobs are treated and cleaned the same way as
glass. When you use the ceramic hob for the first time
it can give off a smell for a short time as the manufacturing
deposits burn off.
This Zanussi hob may be installed into any kitchen
worktop with a depth of 600 mm or more. The worktop
must be constructed of material resistant to 100°C .
The cut out in the worktop should be to the dimensions
shown in fig.1 . Before making the cut out ensure that
the edges of the hob, that are to be adjacent to either a
side or rear wall, have a minimum distance of 55 mm