12
Fig. 12
The Hinged Grill
Some models are fitted with a hinged grill element, to
enable you to clean the roof of the oven easily.
Before proceeding ensure the oven is cool
and is isolated from the electricity supply.
l
Undo the screws which hold the grill in place (see
Fig. 12). When doing this operation for the first time,
we recommend using a screwdriver.
l
Then gently pull the grill downward to allow access to
the oven roof.
l
Clean the oven roof with a suitable cleaner and wipe
dry before replacing the hinged grill element.
l
Gently push up the grill element into place and firmly
screw into place the holding nuts.
Ensure the grill holding nuts are firmly in
place to avoid the grill falling down when in
use.
Replacing the Oven Light
Ensure the electricity supply is switched off
before carrying out this operation.
The oven bulb has to comply to these features:
a) resistant to temperatures of 300 °C;
b) electric rate: 230 V - 50 Hz;
c) electric power rate: 25 W;
d) connection type: E 14.
To replace the bulb, proceed as follows (Fig. 11):
a)
push in and turn the glass lid anticlockwise;
b)
remove tha faulty bulb;
c)
replace it with a new one;
d)
refit the glass lid;
e)
switch on the electricity supply.
FO 0287
Fig. 11
