Zanussi ZBHC8, Руководство пользователя и инструкция по установке

Страница: 12 / 16

-11-
8. Auto-swing :
Start: default running the on and off operation, same with fan. If it is ON, LCD “ ” icon will
display, and “ ” icon will disappear when it is off. When it is off, the swing function is invalid,
and the louver will resume to 0 degree position.
Start2 : When it is fan mode, the default is 90 degree louver position (The actual max angle of the
glass panel is about 85 degrees).
Auto-swing When the fan is running, press the “OSC ” button, the louver will turn from 90
degree position to swing from 45 degree to 90 degree. Press “OSC ” button again, auto-swing
function will stop, and if you press it again, it will run auto-swing again.
Stop: When press "ON/OFF " button or pre-set time runs over, the louver will return to 0 degree
position. But then it will resume in next usage, as recorded in memory.
First start
Stop at any angle 0 degree
90 degree
Restart Stop and shut off
Autimatically memorize
previous setting
Stop at any angle
45~90 degree
oscillation
45~90 degree
oscillation
9. Ionizer Function :
Boot: ON state, the host machine body receiver display window marked bright.
OFF state, the host machine body receiver display window marked out close.
In the OFF state of the circulating fan, the negative ion key is invalid.
Stop: in the process of running, press the negative ion button, negative ions do OFF action, while
the host receiver display window Marked out close;
once again pressed the button, negative ions do ON action, while the host machine body receiver
display window marked bright. So repeatedly.
10. Emergency Button:
Press the start emergency button to automatic mode operation, once again touch the emergency
button to switch to the ventilation mode operation, and touch again the emergency button to switch
to standby mode.
Emergency Button