Zanussi ZBF22451SV, Руководство пользователя

Страница: 9 / 16

Problem Possible cause Solution
The door is left open. Close the door. Refer to "Door
open alarm"
The temperature in the appli-
ance is too high.
Contact a qualified electrician or
contact the nearest Authorised
Service Centre.
A or symbol is shown
instead of numbers on the
Temperature Display.
Temperature sensor prob-
lem.
Contact the nearest Authorised
Service Centre (the cooling sys-
tem will continue to keep food
products cold, but temperature
adjustment will not be possible).
The compressor operates con-
tinually.
Temperature is set incorrect-
ly.
Refer to "Operation".
Many food products were
put in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The "QuickFreeze" is switch-
ed on.
Refer to "QuickFreeze function".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
The compressor does not start
immediately after pressing the
"QuickFreeze", or after chang-
ing the temperature.
This is normal, no error has
occurred.
The compressor starts after a pe-
riod of time.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water outlet to
the evaporative tray.
Temperature cannot be set. The "QuickFreeze function"
is switched on.
Switch off "QuickFreeze func-
tion" manually, or wait until the
resets automatically to set the
temperature. Refer to "Quick-
Freeze function".
dEMo appears on the display. The appliance is in demon-
stration mode.
Keep the OK pressed for approx-
imately 10 seconds until a long
sound is heard and display shuts
off for a short time.
9