Zanussi ZBB28651SV, Руководство пользователя

Страница: 9 / 16

WHAT TO DO IF...
Problem Possible cause Solution
The appliance does not oper-
ate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to the
mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical ap-
pliance to the mains socket.
Contact a qualified electrician.
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance stands
stable.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Contact the nearest Authorised
Service Centre.
The compressor operates con-
tinually.
Temperature is set incorrect-
ly.
Refer to "Operation".
Many food products were
put in at the same time.
Wait some hours and then check
the temperature again.
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The "QuickFreeze" is switch-
ed on.
Refer to "QuickFreeze ".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
The compressor does not start
immediately after pressing the
"QuickFreeze", or after chang-
ing the temperature.
This is normal, no error has
occurred.
The compressor starts after a pe-
riod of time.
Water flows on the rear plate
of the refrigerator.
During the automatic de-
frosting process, frost melts
on the rear plate.
This is correct.
Water flows inside the refriger-
ator.
Food products prevent the
water to flow into the water
collector.
Make sure that food products do
not touch the rear plate.
The water outlet is clogged. Clean the water outlet.
9