Zanussi ZBA32050SA, Руководство пользователя

Страница: 9 / 24

Problem Possible cause Solution
The room temperature is too
high.
Refer to climate class chart on
the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool to
room temperature before storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The "QuickChill function" is
switched on.
Refer to "QuickChill function".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
The water drainage plug is
not correctly positioned.
Position the water drainage plug
in the correct way.
Appliance is fully loaded and
it is set to the lowest temper-
ature
Set a higher temperature. Refer
to "Operation".
Temperature set in the appli-
ance is too low and the am-
bient temperature is too
high.
Set a higher temperature. Refer
to "Operation"
Temperature is set incorrect-
ly.
Refer to "Operation" .
The compressor does not start
immediately after pressing the
"QuickChill", or after changing
the temperature.
This is normal, no error has
occurred.
The compressor starts after a pe-
riod of time.
Water flows on the rear plate
of the refrigerator.
During the automatic de-
frosting process, frost melts
on the rear plate.
This is correct.
Water flows inside the refriger-
ator.
Food products prevent the
water to flow into the water
collector.
Make sure that food products do
not touch the rear plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water outlet to
the evaporative tray.
Temperature cannot be set. The "QuickChill function" is
switched on.
Switch off "QuickChill function"
manually, or wait until the func-
tion resets automatically to set
the temperature. Refer to "Quick-
Chill function".
9