Zanussi ZBA32050SA, Руководство пользователя

Страница: 10 / 24

Problem Possible cause Solution
The temperature in the appli-
ance is too low/too high.
The temperature regulator is
not set correctly.
Set a higher/lower temperature.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The food products' tempera-
ture is too high.
Let the food products tempera-
ture decrease to room tempera-
ture before storage.
Many food products are stor-
ed at the same time.
Add less food products at the
same time.
The door has been opened
often.
Open the door only if necessary.
The "QuickChill function" is
switched on.
Refer to "QuickChill function".
There is no cold air circula-
tion in the appliance.
Make sure that there is cold air
circulation in the appliance.
All the temperature setting
LEDs flash at the same time.
An error has occurred in
measuring the temperature.
Contact the nearest Authorised
Service Centre. The cooling sys-
tem will continue to keep food
products cold, but temperature
adjustment will not be possible.
If the advice does not lead to the
desired result, contact the nearest
Authorised Service Centre.
REPLACING THE LAMP
The appliance is equipped with a longlife LED
interior light.
Only service is allowed to replace the lighting
device. Contact your Authorised Service Centre.
CLOSING THE DOOR
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
TECHNICAL DATA
PRODUCT INFORMATION SHEET
Trade Mark Zanussi
Model ZBA32050SA 923581011
Category 1. Refrigerator with one or more fresh-
food storage compartments
Energy efficiency class A+
10