background image

PREPARATION TO DRYING
1. 
Press the On/Off button for some seconds to

activate the appliance.

2. Load the laundry one item at a time.

3. Turn the programme dial to the programme

suitable for the items to dry. The appliance

defaults to the washing only mode and the

indicator of the Mode - Wash button is on.

4. Tap on the Mode button twice to perform

drying only. The indicator of Mode - Dry button

illuminates and the indicator of Mode - Wash

button goes off.

When drying a big amount of laundry,

to have good drying performances,

make sure that the laundry itself is not

rolled up and that is uniformly

distributed in the drum.

DRYING - AUTOMATIC LEVELS
1. 
Tap on the Auto Dry button repeatedly until the

display shows the required dryness level. The

indicators in the display illuminate accordingly:

a.

 Iron dry: for cotton items;

b.

 Cupboard dry: for cotton and

synthetic items;

c.

 Extra dry: for cotton items.

The display shows the drying programme

duration.
2. 
Touch the Start/Pause 

 button to start the

programme.

In the display the door locked 

 indicator comes

on.

The display also shows the remaining programme

time.

TIMED DRYING
1. 
Tap on the Time Dry button repeatedly to set

the desired time value (see the "Timed drying"

table the "Programmes" chapter). The drying
level indicator   goes off and the indicator 

comes on.

Each time you tap on this button the time value

increases by 5 minutes. The display shows the set

new time value.
2. Touch the Start/Pause 

 to start the

programme.

In the display the door locked 

 indicator comes

on.

The display also shows the remaining programme

time.

AT THE END OF THE DRYING PROGRAMME
• The appliance stops automatically.

• The acoustic signals operate (if they are active).
• In the display 

 comes on.

• The indicator of the Start/Pause 

 button

goes off. The door locked 

 indicator goes

off and the door unlocks.

• Press the On/Off button for some seconds to

deactivate the appliance.

After some minutes from the end of

the programme, the energy saving

function deactivates the appliance

automatically.

1. Remove the laundry from the appliance.

2. Make sure that the drum is empty.

After drying phase, clean the drum, the

seal and the inside of the door with a

wet cloth.

FLUFF IN THE FABRICS

During the washing and/or drying phase, some

types of fabric, (sponge, wool, sweatshirt) could

release fluff.
The released fluff could stick to the fabrics during

the next cycle.
This inconvenient increases with technical fabrics.
To prevent the fluff in your laundry, we recommend

that you:

• To do not wash dark fabrics after you washed

and dried light coloured fabrics (hand towel,

wool, sweatshirt ) and the contrary.

• To dry this type of fabrics at open air when they

are washed the first time.

• To clean the drain filter.

• After the drying phase, clean the empty drum,

the gasket and the door with a wet cloth.

To remove the fluff inside the drum, set a

special programme:

• Empty the drum.

31

Содержание Z816WT85BI













































Отзывы: