background image

FLEXTIME 
With this option you can reduce the programme

duration depending on the load size and the degree

of soiling.
When you set a washing programme, the display
shows the default duration and 

 dashes.

Touch Flextime button to reduce the programme

duration according to your needs. The display

shows the new programme duration and a number

of dashes will decrease accordingly:

 suitable for a full load of normally soiled

garments.

 a quick cycle for a full load of lightly soiled

garments.

 very quick cycle for a smaller lightly soiled

load (max. half load recommended).

 the shortest cycle to freshen up a small

amount of laundry.
The Flextime is available only with the programmes

in the table.

indicator

Cottons 

Cottons Eco

Synthetics 

 

1)

1) Default duration for all programmes.

Flextime with steam programmes 
When setting a steam programme, this button

allows to chose three steam levels and the

programme duration is reduced accordingly:

: maximum.

: medium.

: minimum.

CHILD LOCK 
With this option you can prevent children from

playing with the control panel.
To activate/deactivate this option, hold the
Flextime button pressed until the indicator   

comes on/goes off on the display.
When it is activated, the appliance will default to

this option after you switch it off or change/reset

the programme. If you press any button, the
indicator   blinks to indicate that the buttons are

disabled.

TIME DRY 
Touch this button to set the time that suits the

fabrics you have to dry (refer to "Timed drying"

table). The display shows the set value.
Each time you touch this button the time value

increases by 5 minutes.

You cannot set all time values for

different types of fabrics.

AUTO DRY 
Touch this button to set one the automatic dryness

levels proposed by the appliance.
On the display the relevant dryness indicator goes

on:

 Iron dry: laundry to be ironed.

 Cupboard dry: laundry to be put in store.

 Extra dry: laundry to be fully dried.

You can not set all automatic levels

for each type of fabrics.

DELAY START 
With this option you can delay the start of a

programme to a more convenient time.
Touch the button repeatedly to set the required

delay. The time increases in steps of 1 hour up to

20 hours.
The corresponding indicator above the touch

button illuminates.
The display shows the selected delay time. After
touching the Start/Pause 

 button, the appliance

begins the countdown and the door is locked.

START/PAUSE 

Touch the Start/Pause 

 button to start, pause

the appliance or interrupt a running programme.

19

Содержание Z816WT85BI













































Отзывы: