Zanussi ULTRA COMBI 30, Установка и обслуживание

Страница: 8 / 72

8
Installation and Servicing
SECTION 1 - GENERAL
30 35
Gas supply 2H - G20 - 20mbar
Gas Supply Connection 15mm copper compression
Injector Size mm 4.65 4.9
Inlet Connection Domestic Hot Water 15mm copper compression
Outlet Connection Domestic Hot Water 15mm copper compression
Flow Connection Central Heating 22mm copper compression
Return Connection Central Heating 22mm copper compression
Flue Terminal Diameter mm 100
Average Flue Temp-Mass Flow Rate (DHW) 68ºC - 13g/s 73ºC - 15g/s
Maximum Working Pressure (Sealed Systems) bar 2.5
Maximum Domestic Hot Water Inlet Pressure bar 10.0
Minimum Domestic Hot Water Inlet Pressure* bar 1.3 1.3**
Minimum DHW Inlet Pressure to operate at 0.6bar system pressure All Model sizes 0.5 bar
Electrical Supply 230 V ~ 50 Hz
Power Consumption W 101 114
Fuse Rating External : 3A Internal : T4A HRC L250 V
Water content Central Heating litre 1.2
Domestic Hot Water litre 0.5
Packaged Weight kg 33.8 33.9
Maximum Installation Weight kg 29 29.1
Boiler Casing Size Height mm 700
Width mm 395
Depth mm 278
Table 1 - General Data
Note. Gas consumption is calculated using a
calorific value of 38.7 MJ/m
3
gross or 34.9 MJ/m
3
nett
To obtain the gas consumption at a different calorific
value:
a. For l/s
- divide the gross heat input (kW) by the
gross C.V. of the gas (MJ/m
3
)
b. For Btu/h - multiply the gross heat input (kW) by
26.8
c. For ft
3
/h
- divide the gross heat input (Btu/h) by
the gross C.V. of the gas (Btu/ft
3
)
d. For m
3
/h - multiply l/s by 3.6
Key to symbols
GB
= United Kingdom
IE
= Ireland (Countries of destination)
PMS = Maximum operating pressure of water
C13 C33 C53
= A room sealed appliance designed for connection via ducts to a
horizontal or vertical terminal, which admits fresh air to the burner
and discharges the products of combustion to the outside through
orifices which, in this case, are concentric. The fan is up stream of
the combustion chamber.
I
2H
= An appliance designed for use on 2nd Family gas, Group H only.
* The value is used in the UK Government’s Standard Assessment Procedure (SAP) for energy rating of dwellings. The test data from
which it has been calculated have been certified by a notified body.
*Required for maximum flow rate. Boiler operates down to 2 l/min DHW delivery
** In areas of low water pressure the DHW restrictor can be removed
Maximum DHW Input : 30 35
Nett CV kW 30.4 35.4
Gross CV kW 33.7 39.3
Gas Consumption m
3
/h 3.135 3.657
Maximum
kW 30.3 35.3
DHW Output
DHW Flow Rate l/min 12.4 14.5
at 35°C temp. rise.
DHW Specific Rate l/min 14.5 16.9
Boiler Input :
Max. Min.
30 35
Boiler Input ‘Q’ Nett CV kW 24.3 6.1 7.1
Gross CV kW 27.0 6.7 7.9
Gas Consumption m
3
/h 2.512 0.627 0.734
Boiler Output :
Non Condensing
kW 24.2 6.1 7.1
70
o
C Mean Water temp.
Condensing kW 25.6 6.4 7.5
40
o
C Mean Water temp.
Seasonal efficiency* SEDBUK 2005 91.1% 91.1%
Seasonal efficiency* SEDBUK 2009 89.6% 89.6%
NOx Classification CLASS 5
Table 2 - Performance Data - Central Heating
Table 3 - Performance Data - Domestic Hot Water