9
If the door of the appliance or the small door at
the bottom is opened while the programme is
running, this button must be pressed again after
closing the door in order to restart the programme
from the point at which it was interrupted.
This button must be depressed also after a
power failure and after having re-inserted the
water reservoir, if it has been emptied in the
middle of a programme after lighting up of the
FULL TANK light.
In both cases the light of the Start/Pause button
flashes to remind you that the start button needs to
be pressed again.
6 Indicator lights
These lights indicate the following functions:
DRYING light
This light indicates that the appliance is in the drying
phase.
COOLING light
This light indicates that the appliance is in the
cooling phase. At the end of the drying cycle, there
is a 10 minute cooling phase to cool the garments.
END light
This light is on at the end of the cooling phase,
during the anti-creasing phase and at the end of the
programme.
CLOGGED FILTERS light
This light illuminates at the end of the programme to
remind you the filters must be cleaned.
FULL TANK light
This light comes on at the end of the programme to
remind you the water reservoir must be emptied. If
the light illuminates during a programme the water
reservoir is full. The buzzer sounds, the programme
stops and the Start/Pause button flashes.
CLOGGED CONDENSER light
The clogged condenser light comes on after every
80 cycles to remind you the condenser must be
cleaned.
7 Programme/Time selector dial
Allows you to select electronically controlled or time
controlled drying.
Turn the dial to the required programme or time.
Electronically controlled drying
(automatic)
The dryer runs these programmes with the help of
probes which detect the degree of dampness of the
garments.
Simply select the programme according to the type
of garments and degree of drying required.
Time controlled drying
Can be used to finish off drying if necessary.
Select the 90 or 60 minute programme for cottons
or the 30 minute programme for synthetics.
To cancel a programme which is running, turn the
programme selector dial to “
O
”.
At the end of drying, turn the selector dial to “
O
” to
switch the machine off before removing the laundry.
125993762.qxp 2004-08-27 12:52 Page 9