66
ENGLISH
Use
Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds.
1 “Options” button
Press this button to select the following options:
●
Spin speed reduction
The spin speed will be reduced as follows:
- cotton
QUARZO II: from 1000 to 500 rpm
RUBINO II: from 1200 to 600 rpm
ZAFFIRO II from 1400 to 700 rpm
- synthetics and wool from 900 to 450 rpm
- delcates from 700 to 450 rpm
●
Rinse Hold
(anti-crease)
When selecting this option the water of the last
rinse is not emptied out, to prevent the fabrics
from creasing.
At the end of the programme the pilot lights
DOOR and END illuminate. To drain water,
proceed as follows:
turn the programme selector dial to position “O”;
select
programme (drain)
or (short
spin);
press START/PAUSE button.
2 “ QUICK” button
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (not
for wool and economy programme 60E).
The washing time will be reduced according to the
type of fabric and the selected temperature.
Max. load for cotton 3 kg.
3 “PREWASH” button
Select this option if you wish your laundry to be
prewashed before the main wash (not available for
wool).
The prewash ends with a short spin in programmes
for cotton and synthetic fabrics, whereas in the
programme for delicate fabrics the water is only
drained.
4 “
” button
The Extra Rinse option can be selected with all
programmes except the wool programme. The
machine will perform 2 additional rinses. This option
is recommended for people who are allergic to
detergents, and in areas where the water is very soft.
5 “Start/Pause” button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops flashing
and remain lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Control panel
132995930GB.qxd 29-03-2002 10:09 Pagina 66
