67
6 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
●
WASHING: when this light comes on this means
that the machine is performing the washing
phase. If you have selected the PREWASH
function, this light will be on during the prewash
phase too.
●
= rinses
●
= spin
●
END = end of programme
The END pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something
not working”.
The DOOR pilot light indicates if the door can be
opened:
- light on: the door cannot be opened
- light off: the door can be opened
- flashing light: the door is opening
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 73).
7 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Delicate
• Wool
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position
to “cold wash”.
At the end of the programme the selector dial
must be turned to position O.
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
60
E
60
30
O
90
6
0
4
0
3
0
40
30
40
4
0
C
O
T
T
O
N
SY
NT
HE
TI
C
D
EL
IC
ATE
W
O
O
L
S P
E C
I A
L
132995930GB.qxd 29-03-2002 10:09 Pagina 67
