Zanussi FLS 868 C, Инструкция по эксплуатации

Страница: 9 / 19

26
DESCRIPTION OF THE CONTROLS
Control panel
1. Detergent dispenser drawer
The dispenser is provided with 4 compartments
marked with the following symbols:
Prewash: symbol shows the compartment for
the prewash detergent.
Wash: symbol shows the compartment for
the washing detergent.
Fabr ic softener : symbol shows the
compartment for the softening agents.
Bleach: symbol shows the compartment for
the bleaching agents.
2. On/off lamp
It lights up when the appliance is operating.
3. Rinse hold button
(only for programmes 7 to 12)
Pressing this button together with the programs
for delicate fabrics, the water will remain in the
wash tub at the end of the cycle. Press again to
drain the water and take out the clothes.
4. 1/2 load button
(only for programmes 1 to 4)
Pressing this button before starting the intense
program there will be one rinse less which leads
to energy and water saving.
5. button
If your washing machine is provided with this
push button, press it to reduce the spinning
speed from 800 to 550 r.p.m.
6. Temperature selector
This control allows you to select the temperature
of the washing cycle in accordance with the kind
of clothes to be washed.
Turn the control until the required temperature
coincides with the marker.
On the program table you will find the most
appropriate temperature for each kind of
washing.
Selecting this for any program
will be run with cold water. This will ensure
savings in electricity consumption.
7. Program selector
To select the required program turn the control
clockwise until the marker on the top coincides
with the number of the required program
(reference mark on the control panel). If at any
chance you pass by the required number
NEVER TURN THE CONTROL
COUNTERCLOCKWISE
just continue clockwise
until the required number is reached again.