Zanussi EMZ17-SSB, Руководство пользователя

Страница: 36 / 76

36
www.zanussismallappliances.nl www.zanussismallappliances.be www.zanussismallappliances.fr
TROUBLESHOOTING
ISSUES CAUSES SOLUTIONS
THE DEVICE DOES NOT
WORK, NO BUTTONS
LIGHT UP.
1. The appliance is not
plugged in.
2. The appliance is in standby
mode. 1. Check whether the device is connected to
power supply.
2. Press the ON/OFF button to exit standby
mode.
WATER LEAKING
1. The water tank is
incorrectly inserted.
2. The drip tray is full.
3. The filter holder is
incorrectly locked. 1. Lift up the water tank and make sure you
put it back.
2. Empty the used water from the drip tray.
3. Remove the filter holder, check the coffee
level and replace the filter holder.
THE STEAM NOZZLE IS
NOT WORKING.
1. No water in the water tank.
2. The steam nozzle is
obstructed.
1. Fill the water tank.
2. Proceed to clean the steam nozzle.
THE COFFEE
OVERFLOWS THE
FILTER HOLDER.
1. The filter holder is not
properly locked.
2. The coffee grounds are too
fine.
3. The filter
’s
seal is defective.
1. Remove the filter holder, check the coffee
level and replace the filter holder.
2. Use a thicker coffee grind.
3. Contact the after-sales service.
THE COFFEE IS NOT
HOT ENOUGH.
1. The machine is cold.
2. The cup is cold.
3. Build-up of limescale in the
device.
1. Start a large cup cycle with an empty
adapter to warm the internal circuits of the
appliance.
2. Preheat the cup.
3. Descale the appliance.
OTHER INFORMATION
Technical information
SPECIFICATIONS
MODEL EMZ17-SSB
POWER SUPPLY 220-240V~ 50-60Hz
POWER 1100W
PUMP PRESSURE 20 bars
WATER TANK MAX CAPACITY
1.2 L
WARRANTY
The warranty of the product does not cover any use
that breaches the product instructions for use:
- an installation that does not comply with legal
and regulatory provisions (not having an earth
connection, moving the appliance during use
leading to a cut in the power cord or the supply
and drainage pipe, or subsequent to external
phenomena, such as lightning, flooding, and more