12
7. Start the machine
Before starting up the machine check that:
the appliance is plugged in
the water supply tap is turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
To start the selected programme, press the
Start/Pause
button; the corresponding light stops flashing.
The
Washing
pilot light illuminates.
The machine starts operating.
Start/
Pause
8. At the end
of the programme
The machine stops automatically.
If the RINSE HOLD option has been selected, the phase
light “
End
” is on to indicate that the water must be
emptied out before opening the door.
To do this first turn the programme selector dial to “
O
”
and then to drain programme
or spin programme
.
Reduce the spin speed if needed, by using the spin
speed selector dial.
Release of the lock is also indicated by the illumination
of the “
End
” light.
Turn the programme selector dial to “
O
” to switch the
machine off.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
35.293.010….ZWF1421.qxd 30/3/06 17:25 Página 12
Ofrecido por www.electromanuales.com
