Zanussi Electrolux ZERC 3025, Инструкция пользователя

Страница: 3 / 15

3
CONTENTS
Instructions for the User
Important Safety Information
2
Operation
4
Before use 4
Setting the temperature 4
Fresh food refrigeration 4
Normal operating sounds 5
Movable shelves 5
Positioning the door shelves 5
Hints and Tips
6
Maintenance and Cleaning
6
Internal cleaning 6
External cleaning 6
When the appliance is not in use 6
Changing the light bulb 7
Defrosting 7
Something Not Working
8
Service and Spare Parts
9
Customer Care
9
Guarantee Conditions
10
Instructions for the
Installer
Technical Specification
11
Installation
12
Positioning 12
Rear Spacers 12
Electrical Connection
13
Door Reversal
14
14
Door reversal directions
1. Disconnect from the electricity supply.
2. Gently lay the fridge on its back with the top held
away from the floor by 5-8 cm (2-3 inches) of
packing;
3. Remove the ventilation grill (D).
4. remove the bottom hinge (E) by unscrewing its
three fixing screws;
5. Slide out the fridge door from pin (G), unscrew
the latter and then refit it on the opposite side;
6. remove the two plugs of the door (where
available), discovering the holes for the hinge
pins, assemble them on the opposite side;
7. reassemble the door;
8. using a 10 mm spanner, unscrew the hinge pin
(E) and reassemble it on the opposite side of the
hinge;
9. reassemble the lower hinge (E) on the opposite
side, using the screws previously removed. Slide
the hole cover (F) out of the ventilation grille (D)
by pushing it in the direction of the arrow and
reassemble it on the opposite side;
10.refit the ventilation grille (D), clipping it into place;
11. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs supplied
in the documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
F
F
D
F
F
E
E
G
Printed on recycled paper