Zanussi Electrolux DE 6954, Инструкция

Страница: 13 / 24

13
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
5. Setting and starting the programme
To select a programme, press the push button of the
programme you wish to select, the indicator light of the
push button illuminates and in the digital display will
appear, flashing, the running time of the programme that
has been set. The phase indicator lights foreseen for that
programme will illuminate.
After about 3 seconds from the last pressure of a push
button the programme starts automatically.
In the digital display the running time of the programme is
no longer flashing and the indicator lights of the phases
will turn off except for the phase underway.
6. To interrupt, change or cancel a
washing programme in progress
Interrupt, change or cancel a washing programme in
progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
To interrupt a washing programme in
progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point
in which it was interrupted.
b) Press the On/Off push button (in this case all the
indicator lights turn off). Press the On/Off push button
again; the programme will start from the point in which
it was interrupted.
To change a washing programme
a) If you want to change the washing programme
within the 3 seconds before the start of the
programme, simply press the push button of another
programme, in the digital display will appear the
running time of the new programme.
b) If you want to change a washing programme in
progress, press the push button of another
programme for about 6 seconds. The indicator light of
the new selected programme will illuminate and in the
digital display will also appear the running time of the
programme. (Once selected a new programme, this
will start from the beginning).
To cancel a washing programme in
progress
●
To cancel a washing programme you have to reset the
dishwasher; press simultaneously the function push
buttons 2 and 3 for about 2 seconds, the indicator light
of the running programme starts flashing for about 2
seconds. After about 2 seconds all the indicator lights
will turn off (except for the On/Off indicator light)
indicating that the running programme has been
cancelled.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme
●
Press the On/Off push button.
●
Press the delay start push button until the flashing
number of the hours for the delay start appear in the
digital display.
●
Select a washing programme. In the digital display will
appear, for a moment, the running time of the
programme and then again appears the selected
delay start time.
●
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
●
The opening of the door during the countdown will not
modify the delay start.
●
Once the delay start has elapsed the programme will
start automatically.
To change the "delay start"
●
As long as the washing programme has not yet
started, you can change the number of hours for the
delay start by pressing the delay start push button.
To cancel the "delay start"
●
As long as the washing programme has not yet
started, you can cancel the delay start setting by
pressing the delay start push button until in the digital
display appears the time duration of the selected
programme.
The washing programme will start immediately.
To change a programme after the start of
the the "delay start"
●
If you want to change the selected washing
programme once the countdown for the delay start is
running, press for about 6 seconds the push button of
another programme. The indicator light of the new
selected programme will illuminate and in the digital
display will also appear, for a moment, the running
time of the new selected programme. In the digital
display will reappear the delay time and the
countdown continues.
Starting a washing programme