background image

12

Washing programmes

Programme

Degree of soil

and 

type of load

Heavy soil.
Crockery, cutlery,
pots and pans

Normal soil.
Crockery and
cutlery

Normal soil.
Crockery and
cutlery

Fresh soil.
Crockery and
cutlery

Press the

programme 

button

Cycle

description

(3) Consumption values

Hot prewash
Main wash up to 70°C
2 warm rinses
1 hot rinse
Drying

Main wash up to 60°C
1 hot rinse

Cold prewash
Main wash up to 65°/50°C
1 cold rinse
1 hot rinse
Drying

Cold prewash
Main wash up to 50°C
1 warm rinse
1 hot rinse
Drying

(1)

Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). 
Characterised by a duration of about 30 minutes and a washing temperature of 60°C. 
The time value is approximate and depends on the pressure and the temperature of the water and also by the variations 
of the power supply. 
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast 
and dinner crockery and cutlery.

(2)

Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with 
enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be 
obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of 
washing and drying have been extended.

(3)

The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by 
the variations of the power supply.

"AUTO" washing programme

During the "AUTO" washing programme the amount of soil on the dishes is determined by how cloudy the water is.
If the appliance is partially loaded and the dishes lightly soiled, the "prewash", "main wash", and "rinse" phases of the programme
are shorter and the water consumption level is lower.

If the appliance is fully loaded and the dishes heavily soiled, the "prewash", "main wash", and "rinse" phases of the programme are
longer and the water consumption level is higher.

For this reason the programme duration, water and energy consumption levels can vary within the stated range for AUTO
programme (see "Washing programmes chart").

During the "AUTO" programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C
depending on the amount of soil on the dishes.

70°

INTENSIVE 

WRD

65° - 50°

AUTO

60°

QUICK

50°

ECONOMY

Intensive 70°

WRD

(1) Quick 60°

(2)

Economy 50°

Auto 

65°C - 50°C

Programme duration

(in minutes)

Energy

consumption

(in kWh)

Water

consumption

(in litres)

85 - 95

1,85 - 1,95

21 - 23

90 - 110

1,1 - 1,4

13 - 20

30

0,8

9

130 - 150

0,95 - 1,05

14 - 16

Any.
Partial load (to be
completed later in
the day).

1 cold rinse (to avoid food
scraps from sticking
together).

RINSE & 

HOLD

Rinse and Hold

12

0,1

4

Содержание DE 6954

























Отзывы: