4.
Turn on the router and the mains power to the Zantiks unit. Wait a few
minutes for the MWP unit to power on. When using the MWP version with a
screen, text will scroll across the screen before displaying the IP address of
the unit (which begins with the same 7 digits 192.168.1.). When using the
MWP_vb, your IP address is included on your delivery note. If you have only
one Zantiks unit, the IP address will be 192.168.1.101. The IP address is
used to identify the unit on the Zantiks Control Console.
5.
Using any browser-enabled device:
•
go to your device’s network settings and connect to the wifi network
“Zantiks”
•
type in the network password, which is initially provided as:
behaviour, simply
•
go to the address bar of the web browser and type in the IP address
for your Zantiks unit
6.
Your web browser should now display the Zantiks Control Console page.
Temperature control options for the
MWP
For information on temperature control options and their set up. Please refer back to the
MWP manual. These have not changed between models.
Assembling the Light Stand
The light stand can incorporate a diffusing stand, and so replaces the standard
diffusing stand that is supplied with the MWP_vb unit. The main components
include:
1.
Light stand with incorporated diffusing stand
2.
LED holder (with your choice of wavelength lights)
3.
Control circuit to plug directly into the MWP unit
4.
Foam door (with hole for light plate)
