ZANSKAR HOTSPRING HSTB12, Руководство пользователя

Страница: 8 / 19

BEFORE YOU OPERATE
THE appliance
Read through this manual to better understand how the appliance
works, along with its installation and maintenance procedures.
• Turn on the circuit breaker to bring electrical power to the appliance.
• Open water faucet for a few minutes appliance water flow is continuous and all air is
removed from water pipes. The appliance must be operated after the breakers are turned on.
• After the appliance is supplied with power, a beep sound can be heard along with LED
lights for 2 seconds and no other display. The appliance will then enter standby mode.
• Press to turn ON/OFF the appliance. When the appliance is ON, LED displays setting
temperature for 2 seconds, then displays the actual outlet water temperature. When you stop
operating the appliance for 15 seconds, the screen switches to the screen saver mode. The
display screen will be off. Once you touch the screen again, it turns back on.
• Press and to adjust the outlet temperature. Temperature setting range is 30-55°C.
• If the appliance has been paused, you may initially get a short burst of very hot water while
you switch it on again. Please let the water run for a few seconds to let the temperature
settle down. Please check the temperature of the water before use.
• If the appliance is not used during winter, drain out the water completely to prohibit the
appliance from freezing.
• Please clean the inlet strainer and the shower periodically to allow free and unhindered
water flow.
• There is an automatic memory function to avoid repetitive operation. So, when you switch on
the appliance, the default set temperature will be the same as set to last time.
5