ZANSKAR HOTSPRING HSTB12, Руководство пользователя

Страница: 17 / 19

14
troubleshooting
here’s a little info about the appliance
Problems Possible Causes Corrective Actions
1. Inlet and outlet
fittings leaking
A.
Fittings not tight
B.
Rubber washer worn-out
A.
Tighten fittings.
B.
Change rubber washer.
2. LED no signal
A. Power not connected.
B.
LED damaged.
A.
Connect power to the appliance.
B.
Change LED.
3. Functional keys not
working
A.
No water out from shower.
B.
Water pressure too low.
C.
Key or PCB damaged.
A.
Turn on valve to get water.
B.
Turn on valve to get pressure.
C.
Change key or PCB.
4. Water too hot
A.
Too high temperature set.
B.
Water flow is low.
A. Set a lower temperature.
B.
Open valve bigger.
5. Water too cold A.
Low temperature set.
B.
Water flow is too much.
A.
Set a higher temperature.
B.
Reduce water flow.
6. Outlet flow is low
Inlet strainer or shower clogged. Clean strainer and shower.
7. LED displays E1
Outlet temp. is over 75˚C
A. Reduce the temperature
B. Turn up the water flow
8. LED displays E3 A. the connecting wire loose.
B. Temperature sensor failure
A. Plug in the connecting wire tightly.
B. Replace the temperature sensor