32
5.2
Operations
The following instructions apply generally to both versions of the display.
The only difference concerns the presence of dedicated keys for each compartment, respectively marked by
numbers 1 and 2.
5.2.1
Switching on and off
Road mode:
Stand-by mode:
The start of the motor vehicle by the ignition key
automatically enables the road mode, marked with the
icon .
Make sure that the supply voltage corresponds to that
indicated on the plate (the tolerance is +/- 10% of
nominal voltage) and then insert the plug. This action
automatically enables the stand-by mode, identified by
the icon
.
The presence of the LED on the cab control, indicates the presence of power and the unit is ready for use.
To switch the unit on, push the button
for 3”.
On the display the relating icons to various active components during the various operations will be lighted:
Cooling
:
-
-
Heating
:
-
-
Defrosting
:
Caution!!!
If the vehicle is turned off, is not possible to switching on the unit on road mode.
To switch the unit off, push the button
, or in road mode directly off the vehicle by turning the ignition key; in
this case the next turn on of the vehicle, the unit will restart automatically without press
.
