Zanotti MSB3370Y2 Series, Руководство пользователя

Страница: 41 / 52

41
16 Parameters controller
MSB
Parametro Descrizione Modifica
Hy Differential 2
LS Minimum set point -30
US Maximum set point 15
odS Outputs activation delay at start up 0
AC Anti-short cycle delay 0
CCt Continous cycle duration 00:00
CCS Continuous cycle set point -30
Con Compressor ON time with faulty probe 15
CoF Compressor OFF time with faulty probe 30
CF Measurement unit: Celsius , Fahrenheit °C
rES Resolution (only C) : decimal, integer in
Lod Local display: default display P1
rEd Remote display: default display P1
dLy Display delay 00:00
rPA Regulation probe A P1
rPb Regulation probe B nP
rPE Virtual probe percentage (room temperature) (0 100
dPA Defrost probe A P2
dPb Defrost probe B nP
dPE Virtual probe percentage (defrost temperature) (0 100
tdF Defrost type in
EdF Defrost mode: Clock or interval in
Srt Heater set point during defrost 150
Hyr Differential for heater 2
tod Time out for heater 255
dtP Minimum temperature difference to start defrost 1
ddP Delay before starting defrost 60
d2P Defrost with two probes no
dtE Defrost termination temperature (Probe A) 20
dtS Defrost termination temperature (Probe B) 8
idF Interval between defrosts 4
MdF Defrost Maximum duration 20
dSd Start defrost delay 0
dFd Display during defrost rt
dAd Defrost display time out 30
Fdt Drain down time 4
dPo Defrost at start-up no
dAF Defrost delay after continuous cycle 00:00
FPA Fan probe A P2
FPb Fan probe B nP
FPE Virtual probe percentage (fan management)(0 100
FnC Fan operating mode O-n
Fnd Fan delay after defrost 5
FCt Temperature differential to avoid short cycles of fans 0
FSt Fan stop temperature 40
FHy Differential to restart fan 2
tFE Fan thermostat durin defrost no
Fod Fan activation time after defrost (without compressor) 0
Fon Fan ON time 0
FoF Fan OFF time 0
rAL Probe for temperature alarm P1
ALC Temperature alarm configuration rE